4500W Portable Inverter Generator with CO Sensor

Self Bailing Inflatable Kayak is designed for one paddler. It uses 1000D reinforced PVC and has an inflatable floor with a built-in seat. The listed weight capacity is 300 lb.
n
nSelf Bailing System
n
nDrain holes allow water to flow out of the kayak. In addition, the inflatable floor supports the self-bailing design.
n
nThe kayak uses two air chambers. One forms the main pontoon, while the other includes the floor and seat.
n
nValves and Inflation
n
nThe Self Bailing Inflatable Kayak uses D7 valves. You can inflate the main pontoon from 1.0 to 3.0 PSI.
n
nThe listed seat pressure is 1.0 PSI. Always follow the supplied instructions when inflating the kayak.
n
nSize and Storage
n
nThe kayak measures 90 inches long and 37 inches wide. Meanwhile, the inside measures 57 inches long and 21 inches wide.
n
nThe boat weighs 15.9 lb. When packed, it measures about 22 x 14 inches. Therefore, you can roll the kayak into a smaller size for storage or transport.
n
nWater Use
n
nThe supplied specifications list a Class I to IV water rating. However, water conditions can vary. Paddling skill and local requirements should also be considered before use.
n
nThe Self Bailing Inflatable Kayak does not support a removable tracking fin. It is also not listed for a sprayskirt or electric power system.
n
nKey Specifications
n
nMaterial: 1000D Reinforced PVC
nCapacity: 300 lb / 136 kg
nAir Chambers: 2
nPontoon Pressure: 1.0 to 3.0 PSI
nSeat Pressure: 1.0 PSI
nBoat Weight: 15.9 lb / 7.2 kg
nOuter Size: 90 x 37 in
nInner Size: 57 x 21 in
nPacked Size: 22 x 14 in
nD-Rings: 6 Stainless Steel
nWater Rating: Class I to IV
nTracking Fin: Not Supported
nSprayskirt: Not Supported
nElectric Power: Not Supported