Access 3 Backpacking Tent 3-Person Freestanding 3-4 Season Shelter

Access 3 Backpacking Tent provides sleeping space for three people in a freestanding design. It supports 3–4-season backpacking use. In addition, the tent uses an Easton Syclone composite pole system and provides two doors.
n
n𝗧𝗵𝗿𝗲𝗲-𝗣𝗲𝗿𝘀𝗼𝗻 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆
n
nThe tent has a listed sleeping capacity of three people. Its floor measures 84 x 70 inches.
n
nIn addition, the interior provides 41 square feet of floor area. Therefore, users can check these measurements against their sleeping setup before a trip.
n
n𝟯–𝟰-𝗦𝗲𝗮𝘀𝗼𝗻 𝗗𝗲𝘀𝗶𝗴𝗻
n
nThe tent supports 3–4-season backpacking use. In addition, the tent body uses limited mesh coverage.
n
nTherefore, the design reduces the amount of open mesh compared with tents that use extensive mesh panels.
n
n𝗙𝗿𝗲𝗲𝘀𝘁𝗮𝗻𝗱𝗶𝗻𝗴 𝗦𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗲
n
nThe tent uses a freestanding construction. In addition, multiple guyout points support the intended setup.
n
nUsers should follow the supplied setup instructions when positioning and securing the tent.
n
n𝗘𝗮𝘀𝘁𝗼𝗻 𝗦𝘆𝗰𝗹𝗼𝗻𝗲 𝗣𝗼𝗹𝗲
n
nA unified and hubbed Easton Syclone composite pole supports the tent. The supplied specifications list one primary pole system.
n
nIn addition, the pole has a listed diameter of 9.3 mm.
n
n𝗧𝘄𝗼 𝗗𝗼𝗼𝗿𝘀
n
nTwo doors provide separate entry points. Therefore, occupants can access the interior from either listed doorway.
n
nIn addition, this layout supports a three-person sleeping configuration.
n
n𝗩𝗲𝘀𝘁𝗶𝗯𝘂𝗹𝗲 𝗔𝗿𝗲𝗮
n
nThe tent provides 17.5 square feet of listed vestibule area. In addition, the hooped vestibule includes snow flaps.
n
nTherefore, the vestibule provides covered space outside the main sleeping area for compatible equipment.
n
n𝗥𝗮𝗶𝗻𝗳𝗹𝘆
n
nThe rainfly uses 20-denier ripstop nylon. In addition, it has a listed 1,200 mm Xtreme Shield polyurethane and silicone coating.
n
nRainfly vents also provide airflow through the shelter system.
n
n𝗙𝗹𝗼𝗼𝗿 𝗖𝗼𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻
n
nThe floor uses 30-denier ripstop nylon. It also has a listed 3,000 mm Xtreme Shield polyurethane coating and DWR treatment.
n
nMeanwhile, the supplied configuration does not include a footprint. Users should treat a compatible footprint as a separate accessory.
n
n𝗖𝗮𝗻𝗼𝗽𝘆 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀
n
nThe canopy combines 20-denier ripstop nylon with 10-denier micromesh polyester.
n
nIn addition, the limited mesh configuration forms part of the tent body design.
n
n𝟰𝟳-𝗜𝗻𝗰𝗵 𝗣𝗲𝗮𝗸 𝗛𝗲𝗶𝗴𝗵𝘁
n
nThe tent has a listed peak height of 47 inches. Meanwhile, its floor measures 84 x 70 inches.
n
nTherefore, users can compare the interior measurements with their space requirements before use.
n
n𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝗹 𝗦𝘁𝗼𝗿𝗮𝗴𝗲
n
nTwo internal pockets provide storage for smaller items. As a result, users can keep compatible personal items inside the sleeping area.
n
nThe pockets also separate smaller gear from the main floor space.
n
n𝗣𝗮𝗰𝗸𝗲𝗱 𝗦𝗶𝘇𝗲 𝗮𝗻𝗱 𝗪𝗲𝗶𝗴𝗵𝘁
n
nThe minimum trail weight is 4 lb 6 oz. Meanwhile, the listed packaged weight is 5 lb 1 oz.
n
nIn addition, the packed dimensions measure 7 x 21 inches.
n
n𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀
n
nProduct Type: Backpacking Tent
nModel: Access 3
nSleeping Capacity: 3 People
nSeason Rating: 3–4 Season
nDesign: Freestanding
nMinimum Trail Weight: 4 lb 6 oz
nPackaged Weight: 5 lb 1 oz
nPacked Size: 7 x 21 Inches
nFloor Dimensions: 84 x 70 Inches
nFloor Area: 41 Sq. Ft.
nVestibule Area: 17.5 Sq. Ft.
nPeak Height: 47 Inches
nDoors: 2
nInternal Pockets: 2
nPole System: 1 Unified Hubbed Pole
nPole Material: Easton Syclone Composite
nPole Diameter: 9.3 mm
nCanopy: 20D Ripstop Nylon / 10D Micromesh Polyester
nFloor: 30D Ripstop Nylon
nFloor Coating: 3,000 mm Xtreme Shield PU and DWR
nRainfly: 20D Ripstop Nylon
nRainfly Coating: 1,200 mm Xtreme Shield PU / Silicone
nFootprint Included: No